When I walk to tech class I’m pretty positive were gonna do an experiment because we are doing those a lot lately, of course I was right. I walk into the class and I see on the board it says to go to Nearpod.com we go there a lot, it’s where you go when were doing a new experiment. After my teacher waits a few minutes for everyone to come in, he switches on to the next slide. It’s nothing but a few moments later he says to come to a table, while everyone goes to the table I’m curious what he is gonna talk about.  The experiment were doing is on, battery switches where we have to make a design and see if it works when we check it on on the battery switches and if it works a green lights up. After he explained everything he showed us examples, after he showed us the examples I knew exactly what I was doing. I am making a swing where the tinfoil will be rapped around the swing that’s hanging from the top and put tinfoil at the bottom.

    It’s time to start first I had to grab tinfoil, my safety goggles and cut out a circle on the machine. When I first tried I was so scared because it was really fast and sharp, after I finished (which took a long time) it didn’t look good because some of it was ripped, so I had to start again. This time I tried to be extra careful, and it worked, it looked so good! Now I had to grab the supplies I needed tinfoil, rubber band to hold my swing, popsicle sticks so I can hang my swing on something and tape to make sure the tinfoil was on. First I had to tinfoil at the bottom so I could have another tinfoil to make it worked. Now it was time for the hot glue gun, I grabbed my two popsical sticks, two rubber bands and my circle with the tinfoil rapped around it. First I put the triangle cardboard so my two popsicle sticks would stand up and they did! First thing success, now I need to get another popsicle sticks and rap the rubber band around it. I glued the popsicle stick to the two popsicle sticks. After that I put the tinfoil on the popsicle stick so it would work, now I just had to put the circle in. Done, oh no I forgot to test it I thought to myself but class was over. The next day I run to get my design and test it, when I try to test it wouldn’t work because I needed more rubber bands so I could push it down to the other tinfoil. I get two more rubber bands and it works I push it down and the green light lit up yay!