Cardboard box draft

In tech, we are going to make wooden boxes soon. To get ready for cutting the wood and measuring right, we made cardboard box’s. The first thing we did was make a paragraph of what we wanted our box to look like, and why. I said I wanted my box to look like the one that is an example. I want my box to look like that because it very clean and simple. I think I’m going to put all the cards I get from my birthday and holidays in it. The next step was to draw out the box and label the parts. I needed six different parts to make the box. Then, we did the measurements. I made by box 7.5 x 5 x 4. After making the draft of our box, we got a piece of cardboard. The size of the piece of cardboard was dependent on how big our box was. Next, after getting our piece of cardboard, we started to draw out the different parts of our box on it. My top and bottom were 7.5 x 5, my front and back were 7.5 x 4, and the sides were 5 x 4. Once we were done with drawing out our parts on the cardboard, we were aloud to start cutting the pieces out. We used a certain tool called a scroll saw. When I was finished with cutting out my six pieces, I could start assembling them. Finally, I used tape to assemble my pieces. After that, I was finished!