Reflections for Name Project

Challenges: I found that trying to do the commands to different sprites to make the, move with one button was a little bit hard for me to do. I tried to continue until I figured out how to use it.

Surprises about this activity: I found that the result was a surprise because I didn’t know that I did it correctly or incorrectly.

Which project do I like: I like Aaron’s project because I only had to click once and it moved everything. It also moved around very smoothly and it looked like he didn’t make any mistakes.

Maglev train #1

Final Design Process Reflection


By: Milo

Group members: Jordan, and Dylan                                                                                     

 

The materials our group used at first was two long strip magnets, masking tape, 4 north and south magnets, and two short strip magnets. Our groups first design was putting about two layers of long strip magnets layed down on the bottom of the track on the right and left side. On the train we put two short strip magnets on the bottom of the train.

The first problem we had was the train was not levitating high enough. Our groups solution was putting five long strip magnets on each side of the track. When we tried it again it held 55 marbles.                                                                                                                                                                       

Our last design was putting about seven layers of long strip magnets on each side of the track. On the train car we put two short strip magnets one on each side.

I felt nervous, and happy. I felt nervous when it was our turn to show how strong are train was by putting marbles in the cup that was taped to the top of the cup. I felt happy when our car was able to hold 82 magnets.

Maglev train #1

Final Design Process Reflection


By: Milo

Group members: Jordan, and Dylan

 

The materials our group used at first was two long strip magnets, masking tape, 4 north and south magnets, and two short strip magnets. Our groups first design was putting about two layers of long strip magnets layed down on the bottom of the track on the right and left side. On the train we put two short strip magnets on the bottom of the train.

The first problem we had was the train was not levitating high enough. Our groups solution was putting five long strip magnets on each side of the track. When we tryed it again it held 55 marbles.                                                                                                                                                                       

Our last design was putting about seven layers of long strip magnets on each side of the track. On the train car we put two short strip magnets one on each side.

I felt nervous, and happy. I felt nervous when it was our turn to show how strong are train was by putting marbles in the cup that was taped to the top of the cup. I felt happy that we won.