Third Switch and Breadboard(Blog Post #6)

My third switch was a very complex different idea. I first was going to make this a seesaw push switch. This turned out to be a popsicle falling switch. When you un-tape the popsicle it falls down and hits the tinfoil. The switch has a base of popsicles and small straws. Here is the switch:

As you can see the popsicle is hanging and will eventually touch the tinfoil on the bottom. After these tree switches we started to experiment with breadboards. When we were using the breadboard, we could put a wire in a different part of the breadboard and the wire were not touching the LED wire but the LED lights would still light up.