For this project, I went through the Nearpod from Mr. Calvert. I followed the instructions, and did everything the Nearpod said. The middle part is called the ravine, and on the left and right there is a positive and negative side. After learning about breadboards, I went on to start my project. Putting the wires in the breadboard was hard, but they eventually stayed. While I was putting the cap on to the battery, I saw a flicker of orange light, which could be a fire or something because the wires touched. Then I put the gray and red wires and took out the led light. After combining everything together, the red led lit up. All in all this project was fun, and I think I did well because the LED lit up.