Monthly Archives: October 2018

Final blog!!!

Posted on by
Reply

On wednesday I finished the project!! After I got the furiating design done ✅, of course.  I actually started to get how to do it after a while and ended up finishing it after a while.

After that I had to do the cutting. The noise that saw made! But I did it no problemo.

Then I did the drill press. At first I was really nervous but it was easy in the end.

Finnaly, I curled the wires and made the circuit. It took a good bit of soldering 👨‍🏭 though. There was a faulty switch that I had to un-solder as well, so that was a bit annoying. But other than that, it was a fun and finished project!!

Tech-9

Posted on by
Reply

On Friday (I didn’t have time for 9) I finished something called my very own switch!! It wasn’t that hard, since I don’t care 🤷‍♂️ about fancie pancie decorations because they suck and the are too time 🕢 consuming. So I picked a simple piece of cardboard and got to work. I decided to make a “circle” ⭕️ switch. So I started by cutting a circle ⭕️ using a xacto knife. It was really blunt though. The I made a hole using a 🔨 and a cylinder in a piece of cardboard . Then I fitted a straw in the hole and put the circle ⭕️ ( which also had a hole) on the straw. Then I hot glued it together. I then added foil to the circle ⭕️ and the cardboard. I was done ✅!!

Tech-8

Posted on by
Reply

Yesterday (Tuesday) and today we played the self driving car 🚗 game. It was a game where 2 people on each side would throw cards ♦️ ♥️. Then the player in control of the 3 switches would look at the cards. If there was a red card to the right, the he would throw the right switch, both red would be the middle, you get the idea. It was really fun at first, but really, it was a very short⌛️🕢 lasted thing. All in all, after a while, we got bored 😑 🤷‍♂️. So we started blogging which is why this has been typed.👀👅

Tech – 7

Posted on by
Reply

On Friday (the next week) and also Thursday I pulled of a miracle. And it started like this: By Thursday I had made the body (but really it was 60% other people👬) and was ready for the legs. Then me and Walker spent the whole day trying to make it stand, and eventually we did!! Then I put my name on the soldering 👨‍🏭  list. At the end of class, I was about to learn how then get going but Brrrrrrriiinng!! The bell 🛎 rang. Then, on Friday I was next and you know what happened next. I finished. Hallelujah 😇👏!!

Tech -6

Posted on by
Reply

On Thursday (I skipped wednesday) we started to make Sater people . We were given instructions, and of we went. It sucked. I couldn’t do these “twists” because I (and a lot of others) didn’t find the instruction sheet clear enough. Also I won’t leave out the fact that I kind of sucked at it.🤷‍♂️ It was very frustrating 😡but I did it anyways. And that is practically how I spent Friday, too. 😡 Yay, not!!

Tech – 5

Posted on by
Reply

Last week on monday (yes, it’s been that long) wee did some work on breadboards. We made a circuit that involved turning on a light 💡. It was only LED, pardon the emoji. I ended up doing two because I was really good at breadboards (I once made a robot with a breadboard at a google convention :<). Then the next day we made a paper roller on our own (it was IKEA) and my table built 2. Then we had to design means of transportation for the blind. We would draw the design on paper 📝. I came up with: a robot 🤖 dragon 🐉, a teleportation device, and an automatic-drive car 🚗. That was a fun 2 days!