My box is finished and I will make a blog post about the entire process but this post is about what I did since my last post.

My box after flocking

After hinges I flocked.

Here is how I flocked:

1. Apply glue
   1. Make sure it is heavily applied to part of exposed wood
2. Apply flocking
   1. Take a big scoop of flocking
      1. put it in box
   2. SHAKE BOX
3. Dump out extra flocking
4. Wait a day to dry
5. Check if it is done (there is no empty patches)
   1. If done then flocking is done
      1. If not: fix it
         1. Dap glue into missing spots
         2. Reapply flocking
         3. Go back to waiting a day and checking if done

I hade to reapply once.

My box after engraving

Then I engraved. I used a cool wood burning tool that looked kinda like a soldering iron.

Then I waxed. Here is how I waxed:

1. Do paste wax
   1. Rub in paste wax
   2. Use towel to rub off paste wax
2. Do spray wax
   1. Do one side
      1. Spray a little wax on
      2. Rub in the wax
   2. Repeat on all sides

MY FINISHED BOX