This project in tech was one where you have to make switches that complete a circuit. We had to make three different unique circuits.

In my first one, I was just trying to make a switch that worked, but I also wanted to make it pretty cool. I thought that I would make something that had two sides and when one goes back the other goes forward and hits the tinfoil.

For my second one, I decided to make it a little more complicated and cooler looking. I decided to do one that pushes a popsicle stick into tinfoil on the bottom. This was the hardest one to make, because I had to make the popsicle stick not loose enough to fall down or go out of place, but not tight enough to get stuck. This one is my favorite out of the three.

For my last switch I decided to make a small one that works easily. I wanted to make one where you push tinfoil into other tinfoil. First, I built up a little bit, and then I made it so you push a straw with tinfoil on it into a wall of tinfoil. This one didn’t take as long to build as the other ones, but it still worked fine.

Solder Person

The Solder Person project wasa project in which everyone would get a wire and we would have to bend it and solder it in a certain way to make it a person. This project was the hardest project we have done so far in my opinion. First we were gave a wire that was about 8in. We had to cut a 5in piece to make the head and legs. This was the most difficult part because we had to wrap the wire tightly around a pencil and around the body. Eventually, I got it though. Once I had the head and feet I took the 3in piece and soldered it the the back of the person, and now I have a basic person. The only thing left to do is to give my person something to do. I chose baseball. I cut a little piece of wire to make a bat and then soldered it to my person. Overall this project was really difficult, but the soldering was really fun.




Self-driving cars

Cars are transforming. People are trying to create cars that don´ t need a driver. There are a lot of things to take into consideration  when making one of these. You have to make sure that your car knows what everything is. There have been cars that have mistaken a cargo truck for a bridge, and rammed into it. These are one of the many things you have to consider when making a self-driving car. Another thing people have to be careful of is bad drivers. There are a lot of bad drivers in the world and self-driving cars will have to know how to deal with these people. There are also many other things people have to take into consideration when making a self-driving cars, but these are some of the main ones.